XCRS74-400×300 Wet Magnetic Separator

Short Description:

XCRS drum-type wet weak magnetic separator is mainly used in metal beneficiation laboratory. It uses the wet method to conduct magnetic selection of fine grain strong magnetic ore, and the selection form is smooth flow. XCRS drum wet weak magnetic separator is small in size, light in weight, simple operation, convenient maintenance. The equipment is not suitable for ore-dressing test with corrosive liquid, and should be reliably grounded.

CONTACT NOW download

Product Detail

Product Tags

Product picture

technical specifications

order number	name	unit	numeric value
1	Magnetic drum effective size	mm	400*300
2	Magnetic field strength of the magnetic drum surface	M T	125
3	Magnetic drum speed	r/min	25
4	rated operational current	A	0-4
5	Magnetic electrode coil temperature rise	℃	＜100
6	Maximum particle size	M m	2
7	supply voltage	V	380 Three-phase and four-wire lines
8	frequency	Hz	50
9	weight	K g	About 300

Structure of the brief introduction and features

The XCRS drum type wet weak magnetic separator is composed of the main body of the magnetic separator and the drum type power supply. The main body of the magnetic concentrator mainly includes: frame, magnetic drum, ore tank, water spray pipe, transmission device and feed tank.
The drum power supply is a separate silicon bridge rectifier power supply, whose output is adjusted through the voltage regulator handle.
1, frame: made of Angle steel welding, for the supporting part of the whole machine.
2, magnetic drum: it is equipped with four exciting magnetic coils and magnet core, and an additional magnetic pole without exciting magnetic coil on the side of the discharge, to facilitate ore discharge, the five fan fixed in the magnetic pole
On the spindle, the spindle is fixed on the frame through the support bearing tile, and the cylinder is made of non-magnetic material aluminum and no
Made of rust steel, fan coil connection to cause the alternating polarity of the magnetic field in each magnetic pole, the ore is flipped up to 180 degrees through each magnetic pole, under the action of magnetic stirring, can improve the quality of magnetic products. At one end of the spindle, it is a square extension structure, which can use a hand plate to rotate the magnetic pole of the magnetic drum around the axis to meet the selection needs of different minerals.
3, transmission device: installed at the bottom of the side of the rack, in order to reduce the center of gravity, transmission part consists of three ac motor and worm wheel, worm gearbox, the output of the transmission through the chain to magnetic drum, drive magnetic drum rotation (pole is not turn), the speed of the drum for the constant speed 25 RPM, magnetic drum rotation direction is consistent with ore direction.
4, Mining tank:
It is made of aluminum and stainless steel plate welding and fixed on the rack on the feed side of the mine tank and the lower part of the concentrate tank for connection.
5, Spray pipe:
A copper pipe with a hole installed on the rack is connected with the indoor water source for flushing the concentrate on the magnetic drum; the water spray angle can be adjusted by rotating the water pipe.
6, Paving deposit box:
The box is made of stainless steel plate welding, which is to ensure the uniformity of feeding.

Product video